37
601-000147 Rev. Y
Arch. 5105
25/02/2016
The first operation to execute is the insertion of the old password value, subsequently is required to
enter the new password value.
WARNING
: the password value must be a combination of upper and lower case letters and number
(minimum of 5 and maximum of 8 characters).
In the example above, the “hello12” password value is not available because it is too simple, so the
password is unchanged.
The next example shows a correct password value insertion:
$ passwd
Changing password for super_user
Old password:------
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:qwe123r
Re-enter new password:qwe123r
Password changed.
The “qwe123r” combination is an example of available password, the re-insertion value operation is
required, and then the password is changed.
7.2.4 Exit
The
exit
command is used to exit from the super_user login. When the command is executed the user
is disconnected from the system.
$ exit
The following message appears when the user is log out:
<Connection closed by foreign host>
Summary of Contents for EK-MFR/2
Page 1: ...1 601 000147 Rev Y Arch 5105 25 02 2016 User Manual System ALL4DIGIT EK MFR 2 ...
Page 9: ...9 601 000147 Rev Y Arch 5105 25 02 2016 1 1 EK MFR 2 BLOCK SCHEME ...
Page 18: ...18 EK MFR 2 25 02 2016 Arch 5105 601 000147 MN Rev Y Tabella 5 1 Indoor version Set up Table ...
Page 66: ...66 EK MFR 2 25 02 2016 Arch 5105 601 000147 MN Rev Y ...
