20
INSTALLATION
The following tables give the values of the various parameters .
Notes:
- If the ON\OFF button is pressed during parameter setting, the unit returns to the main menu without saving the
settings .
-If no button is pressed within 20 seconds during the setting-display phase, the system saves the settings and returns
to the main menu .
SETTING FUNCTIONS
Via the display it is possible to view several unit operation
states or set several machine control parameters .
For setting, proceed as follows .
Press the button
once for 10 sec . The value 000 will
appear in the main area of the display .
Press the button
until the value 66 appears . Confirm with
the button
.
The various parameters characterised by their parameter code
and value will be displayed . Use the button
to scroll the list
of parameters to view or modify .
For a parameter to be modified, scroll the list until selected and
confirm with the button
The parameter will start flashing .
Use the buttons
or
to modify the parameter then
confirm with the button
After confirming, to modify or view other parameters, using the
buttons
or
scroll the list of parameters and repeat
the above steps .
To exit the settings menu or viewing press the button
.
Fig .1
