EN
Instantaneous gas water heater
SI 11A
10
6(59,&($1'0$,17(1$1&(
Use a cloth and soapy water to clean the external casing. Do not use abrasive detergents or solvents. The high
quality of the materials used and the strict controls undergone by the units during production ensure a long service
life of the water heater, for the complete satisfaction of the user. To prolong the service life of the water heater, it is
advisable to check and clean it once a year. This type of activity must be carried out by the After-Sales Technical
Service.
CONVERSION TO ANOTHER TYPE OF GAS
All the conversion operations described below must only be carried out by Qualified Personnel (meeting the
professional technical requirements prescribed by the current regulations) such as those of the Local After-Sales
Technical Service.
The Manufacturer
declines any liability for damage or injury caused by unqualified and unauthorised people
tampering with the unit.
NB : The water heater is arranged for a specific gas type, as indicated on the dataplate. If modification is
required, it is necessary to obtain the special conversion kit available from the After-Sales Technical Service,
proceeding as follows:
1.
Close the gas and water supplies, remove the knobs and the casing.
2.
Replace the burner nozzles (1) with those contained in the kit and indicated in the table.
A
1
3.
Replace the power regulator pin (2) with that contained in the conversion kit, making sure to position it
correctly.
2
B
4.
As proof of the conversion, apply (near the dataplate) the sticker contained in the conversion kit.
MODELS
NOZZLE DIAMETERS
LPG Natural
Gas
SI - 11A
0.72 1.15
