Part number HA028582. Issue 6.0 May-07 35
5.
Operator Level 2
Level 2 provides access to additional parameters. It is
protected by a security code.
5.1
To Enter Level 2
1.
From any display press and hold
.
2.
After a few seconds the
display will show:-
3.
Release
.
(If no button is pressed for 45 seconds the
display returns to the HOME display)
4.
Press
V
or
W
to
choose
Lev 2
(Level 2)
5.
After 2 seconds the
display will show:-
6.
Press
V
or
W
to enter the
pass code. Default = ‘
2
’
7.
If an incorrect code is entered the controller
reverts to Level 1.
5.2
To Return to Level 1
1.
Press and hold
2.
Press
W
to select
LEv 1
The controller will return to the level 1 HOME
display. Note: A pass code is not required when
going from a higher level to a lower level.
5.3
Level 2 Parameters
Press
to step through the list of parameters.
The
mnemonic of the parameter is shown in the lower
display. After five seconds a scrolling text
description of the parameter appears.
The value of the parameter is shown in the upper
display. Press
V
or
W
to adjust this value. If no
key is pressed for 30 seconds the controller returns to
the HOME display
Backscroll is achieved when you are in this list by
pressing
V
while holding down
.
The following table shows a list of parameters
available in Level 2.
Summary of Contents for 3200
