L 7500 /
NO.FS75RC
MAGNIFIER EN
Warning:
Please read this instruction manual carefully before using the instrument and keep it for future use.
A.
SAFETY INSTRUCTIONS
1.
The device is intended exclusively for private and not for commercial use. Only use this device as describe in this instruction
manual.
2.
Do not place any part of this appliance in water or any other liquid.
3.
Do not handle the unit or plug with wet hands.
4.
Unplug from the power outlet after use and allow the appliance to cool down completely before to clean it or to move it.
5.
When disconnecting the cable, always pull at the plug; do not pull on the cable itself.
6.
When using the device, always pull the power cord completely from its housing to prevent overheating.
7.
If the cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to
avoid an electric shock.
8.
Never try to repair it by yourself. It must be repaired by the manufacturer or its service agent or a similarly qualified person in
order to avoid an electric shock.
9.
The power cable must be checked regularly to avoid damage. If the power cable is damaged it must be replaced by a qualified
service center to avoid any danger.
10.
Always place your device on a dry surface.
11.
Do not use outdoors.
12.
Do not let the power cord on the edge of a table or work surface, and prevent it comes into contact with hot surfaces.
13.
Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.
14.
Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
15.
This unit is not designed to be operated by means of an external timer or a separate remote control system.
16.
For your safety, avoid staring at the LEDs and never point them at another person or animal.
B.
HOW TO USE IT
1) Unfold the magnifier and adjust the angle and position of
the magnifier head.
2) Choose the power source (battery or USB cable):
Battery operation
- Open the battery cover on the handle of the magnifying
glass.
- Insert 3 "AAA" type batteries. Please observe the polarity
of the batteries.
- Replace the battery cover.
USB Cable operation
- Remove the batteries if you had inserted them before or
make sure there are no batteries.
- Connect the magnifier to a USB adapter or to a computer
with the supplied cable.
3) Illumination
Press the ON/OFF button to turn on the magnifier LEDs.
Press a second time to increase the intensity of the LEDs.
Press a third time to turn off the LEDs.
C.
CARE AND MAINTENANCE
Clean the product only with the cloth supplied with the magnifier.
Do not use abrasive cleaners to clean the unit.
ON/OFF button
