background image

Page 9/131

July 2021

HE18 | User manual

3.

Operating Personnel

The authority of the personnel with respect to the operation, maintenance, repair of the machine as well as the 
safety technical inspection must be clearly recorded by the operator. The personnel to be instructed may only work 
on or with the excavator under the supervision of an experienced person.

User

Pursuant to the regulations of the accident insurance, independent operation of the excavator may only be 
performed by persons older than 18 years of age, who have been instructed in the operation of the excavator, have 
proved their skills to the operator (company) and of whom it may be expected that they perform the entrusted tasks 
reliably.

Only trained and instructed personnel may work on or with the excavator.

Only instructed personnel are permitted to start the excavator and to operate the control elements.

Qualified Personnel

Qualified personnel is understood to mean persons with a technical skilled worker training who is capable of 
ascertaining damage to the excavator and carrying out repair work in his/her field of specialization (e.g. hydraulics, 
electricity).

Authorized Personnel

On the basis of his/her vocational training and experience, the authorized personnel must have adequate 
knowledge in the area of excavating and with the applicable national work protection standards, safety regulations 
and the generally recognized rules of technique that he/she can assess the work safety condition of the excavator.

4.

Storage of the operating instructions

The operating instructions must always be stored with the excavator. If the 
operating instructions have become illegible due to continuous use, the 
operator must make sure a replacement copy is obtained from the 
manufacturer.
There is a storage area (

1

) for the operating instructions on the front of the 

seat console under the protective plate.

5.

Parts

When ordering parts, always provide the following data:

Serial number of the machine and the year of manufacture (see the model plate)

Name/type of the part

Article number of the part

Quantity of items

Customer number

For orders, please contact your Eurotrac dealer.

Summary of Contents for HE18




































































































































Reviews: