background image

 

MM850592 ed. 01 - Mini MMX II 

 

 

2

INTRODUCTORY NOTE

 

This manual has been with all the information you need to install, operate and maintain the instrument. 
 
Eurotron has used the best care and efforts in preparing this book and believes the information in this 
publication are accurate. The Eurotron products are subjected to continuous improvement, in order to 
pursue the technological leadership; these improvements could require changes to the information of this 
book.  
 
Eurotron reserves the right to change such information without notice. 
 
Any maintenance operation must be carried out by qualified personnel only. Eurotron supplies instructions 
and operative procedures for any operation on the instrument. We recommend contacting our technicians 
for any support requirements. 
 
The instrument is fully tested in conformity with the directive n°89/336/CEE Electromagnetic Compatibility. 
Eurotron shall not be liable in any event, technical and publishing error or omissions, for any incidental and 
consequential damages, in connection with, or arising out of the use of this book. 
 
The operator must not use this equipment for any other purpose than that stated. 
This document is the property of Eurotron and may not be copied or otherwise reproduced, communicated 
in anyway to third parties, not stored in any Data Processing System without the express written authority of 
Eurotron Instruments S.p.A. 

 

 

 

 

 

 
 
 

All rights reserved 
Copyright © 2006  

Eurotron Instruments SpA 

Viale F.lli Casiraghi 409/413 
20099 Sesto S. Giovanni (MI) 
Tel. : +39-02 24 88 201 
FAX: +39-02 24 40 286 
Mail: info@eurotron.com 

 

 

Summary of Contents for Mini MMX II




























Reviews: