programmable energy-saving
radiator thermostat
User manual and Guarantee
www.eurotronic.org
5
Display and control elements
1 Heating times
2 Child lock active
3 Battery low
4.a Travel function
active
4.b Comfort tempe -
rature active
4.c Economy tempe -
rature active
4.d Window/freeze
protection function
active
5. AUTO or MANU mode active
6.a Button
MENU
– leads to the main menu
(starting from regular display); within the
menu one keypress leads to the previous level
6.b Button
OK
– confi rmation of setting
6.c Button
– timer function
7 Button and
Mo
Di
Mi
Do
Fr
Sa
So
:
AUTO
MANU
0
24
6
12
18
1
4
2
3
5
7
6
2
By the way…
Do you already know about
PROGmatic
? – You can
programme
SPARmatic Zero
by hand or you can use
our convenient programming stick to copy your per-
sonally specifi ed heating and economy times onto all
your EUROtronic energy-saving radiator thermostats
at your home which have a programming port in a
matter of seconds.
PROGmatic
is available
from specialised stores
and at: www.eurotronic.org
6
Set up menu
By pressing
MENU
you will arrive at the set up menu.
Please choose one of the items with the Button
or . With
OK
you can select one menu item and
with the Button or they can be adjusted. The
button
OK
confi rms the setting. The button
MENU
leads to the previous level.
to select the mode
AUTO = automatic mode
MANU = manual mode
setting of time programme
setting of comfort and
economy temperature
setting of date and time
window function
reset of the device to factory preset
starting of a new adaptation
to adjust the valve
travel function
installation function
adaptation of temperature
to the room situation
standby function
3
Index
4 –
Scope of delivery, application as directed
5 –
Display and control elements
6 –
Set up menu
7 –
Inserting / replacing batteries
8 –
Setting date and time
9 –
Installation
10 –
Dismounting
11 –
Adaptation
12 –
Basic operating modes
13 –
Setting heating and economy times
14 –
Setting comfort and economy temperature
15 –
Manual operation
15 –
Additional setting possibilities
19 –
Cleaning and used devices
20 –
Adapter
21 –
Help
22 –
Declaration of Conformity and Guarantee
7
Inserting / replacing batteries
In order to open the battery
compartment please
push at the marked
positions to
remove
the cover.
Then insert the
batteries as shown
in the illustration.
Do not use accumulators!
Ensure that the polarity is correct!
Attention:
Never recharge batteries, danger of explosion! Do
not short-circuit batteries! Do not disassemble bat-
teries! Take low batteries out of the device immedi-
ately. Keep batteries away from extreme warming
– danger of leakage! Do not apply used and new
batteries together. If needed, clean the battery and
the contacts before using them. Keep the batteries
away from children. When getting in touch with bat-
tery acid instantly irrigate the affected parts with
clear water and call a doctor.
4
Please read the user manual before you place the
thermostat. Keep the documents for later questi-
ons and provide them if you pass the thermostat
on to other persons.
Scope of delivery
1
SPARmatic Zero
energy saving radiator thermostat
1 User manual
1 Connector
3 Adapters
Application as directed
By purchasing the
SPARmatic Zero
energy- saving
radiator thermostat you own a programmable radi-
ator thermostat which can be used for temperature
regulations in enclosed rooms and therefore, it can
contribute to the reduction of heating energy. – Ple-
ase use the thermostat only for this purpose.
The EUROtronic programming port is intended
ONLY for our EUROtronic programming stick.
Never
connect other devices with the program-
ming port!
8
Setting date and time
After inserting the batteries for the fi rst time the date
will fl ash on the display. Now, date and time can be set.
Set date with the Button or .
Confi rm with
OK
.
Set month with the Button or .
Confi rm with
OK
.
Set day with theButton or .
Confi rm with
OK
.
Set hour with the Button or .
Confi rm with
OK
.
Set minute with the Button or .
Confi rm with
OK
– That´s it.
On the display
will be shown. Now, the mo-
tor will completely move to the installation position
in order to make the installation easier. As soon as
SPARmatic Zero
is ready for installation
will be
shown on the display.
You can also set date and time via the menu item
later on. But in case of that,
SPARmatic Zero
does not move to the installation position.
➔
In case of replacing batteries, the stored time
programme will remain active. You should
check the specifi ed time to ensure that.
