Did you know?
The Serial mode is the more loud position because of a 18 times fixed gain for each filterboard, that
multiply themselves during the signal path.
THE NATURAL MONO PARALLEL AND FALSE-STEREO PARALLEL
This is not a common configuration for a filterbank. As you can see in the images the
∑
/ SERIAL switches are in
∑
position. It means that you do not send the audio processed by the A-board to the B-board but into the Summing
Circuitry instead, labeled by the Greek and mathematical
∑
symbol. In this case this routing method can exclude
the B-filter, and obviously also the C, from
this
audio line. But remember that all the three filterboards have their
own audio input.
This simple routing method allows some uncommon patching possibilities:
•
A-board going to
Parallel
port, 12 dB/oct nominal
[
50
]
the natural position
The Triple LP Mono Serial Natural Position
If you set the three
Cƒs
exactly to zero the
MasterCƒ
range is a little limited. Set them to the
flat position to allow the maximum possible Master C
f
range.
Summary of Contents for Vertice
