10
5. “Timer 1” screen will appear.
Press “OK” and the first number will begin to flash.
Use the Up/Down keys to increase or decrease the value.
Use the Right/Left keys to move the cursor to the number you would like to
change.
After the proper time is set, press “OK”.
Note: Only the T = 00:00m will be set. The Ta = 00:00 is not a programmable function.
6. The EA-32000 offers two programmable timer settings. Press the Up/Down keys to
navigate the timer choices. When the desired timer appears, repeat step five to change the
time.
7. After settings the timers, press the “ESC” button twice to return to the opening screen.
The Lab Control Unit is now ready to operate. Close and latch the door.
