14:Endpoint3 Enable
Auto Turn-OFF Timer
Paramter No: 14(0x0E) Size:1 Byte Value=0 Auto Turn-OFF Timer
Disabled (default);
Value=1 Auto Turn-OFF Timer
Enabled
15:Endpoint3 Count Down Configuration(Turn off the output by time）
Paramter No: 15(0x0F) Size:2 Byte Value: xx xx Turn off Output
Value Scope :1----65535Minutes (default:60M)
16:Endpoint3 Enable
Auto Turn-ON Timer
Paramter No: 16(0x10) Size:1 Byte Value=0 Auto Turn-ON Timer
Disabled (default);
Value=1 Auto Turn-ON Timer
Enabled
17:Endpoint3 Count Down Configuration(Turn on the output by time）
Paramter No: 17(0x11) Size:2 Byte Value: xx xx Turn off Output
Value Scope :1----65535Minutes (default:60M)
18:Endpoint4 Enable
Auto Turn-OFF Timer
Paramter No: 18(0x12) Size:1 Byte Value=0 Auto Turn-OFF Timer
Disabled (default);
Value=1 Auto Turn-OFF Timer
Enabled
19:Endpoint4 Count Down Configuration(Turn off the output by time）
Paramter No: 19(0x13) Size:2 Byte Value: xx xx Turn off Output
Value Scope :1----65535Minutes (default:60M)
20:Endpoint4 Enable
Auto Turn-ON Timer
Paramter No: 20(0x14) Size:1 Byte Value=0 Auto Turn-ON Timer
Disabled (default);
Value=1 Auto Turn-ON Timer
Enabled
21:Endpoint4 Count Down Configuration(Turn on the output by time）
Paramter No: 21(0x15) Size:2 Byte Value: xx xx Turn off Output
Value Scope :1----65535Minutes (default:60M)
22:Endpoint5 Enable
Auto Turn-OFF Timer
Paramter No: 22(0x16) Size:1 Byte Value=0 Auto Turn-OFF Timer
Disabled (default);
Value=1 Auto Turn-OFF Timer
Enabled
23:Endpoint5 Count Down Configuration(Turn off the output by time）
Paramter No: 23(0x17) Size:2 Byte Value: xx xx Turn off Output
Value Scope :1----65535Minutes (default:60M)
24:Endpoint5 Enable
Auto Turn-ON Timer
Paramter No: 24(0x18) Size:1 Byte Value=0 Auto Turn-ON Timer
Disabled (default);
Value=1 Auto Turn-ON Timer
Enabled
25:Endpoint5 Count Down Configuration(Turn on the output by time）
Paramter No: 25(0x19) Size:2 Byte Value: xx xx Turn off Output
Value Scope :1----65535Minutes (default:60M)
Value Scope :1----65535Minutes (default:60M)
26:Manual Control
Paramter No: 26(0x1A) Size:1 Byte Value=0
Manual Control Disabled
Value=1 Manual Control
Enabled
(default);
27:Status LED Configuration
Paramter No: 27(0x1B) Size:1 Byte Value: 00 Output ON,Led ON.
`
Value: 01(default) Output ON,Led OFF.
Value: 02 Always OFF
Support for Association Groups
ZW1505 supports 6 association groups. A maximum of 5 node ID’s (nonmulti-channel devices) can be assigned to these association groups.
