Follow these simple steps and you’ll be enjoying a
luxurious massage in no time
Charging your smart wand
Note:
Cleaning, storage and safety
Press the button to turn on
Press the middle button to switch between steady
8 pulsating patterns
Press the top button to adjust the speed of the wand
Press the button again to turn off your wand
When your wand’s vibration is weak, or does not turn on,
but the LED is still on, please charge it
Insert the DC plug into the port at the base of the wand.
Insert the USB cable into a USB power outlet. The LED on
the wand handle will light up to indicate it is charging.
When it is fully charged, after 1.5 hours, the LED light
will turn off
The vibrator is a personal massager and not classified as
a medical device
Do not massage open wounds, or your chest & throat area.
If you experience discomfort during the massage, you should
stop using the wand and consult a healthcare professional
Do not use when plugged in and charging. To charge, please
insert the DC plug into the port gently
You can wash the silicone with warm water and antibacterial
soap. Rinse with clean hot water and pat dry with a lint-free
cloth or towel. Never use cleaners containing alcohol, petrol
or acetone.
Avoid leaving your vibrator in direct sunlight and NEVER
expose it to extreme heat. Store your vibrator in a dust-free
place and keep it away from products of other materials.
Specifications
Size:
200mm (L)X42mm(D)
Weight:
162g
Materials:
Si ABS inside
Battery:
Li-ion 500mAh 3.7v
Charging time:
1 hour
Working time:
2 hours
8 speeds
20 vibrations
Turn on/off
