www.evacuatoralarms.com
Evacuator Synergy RF Base Station User Guide
Evacuator Synergy RF Base Station user operating instructions.
Thank you for choosing the Evacuator Synergy RF Wireless Alert system. In order for you to realise
the full potential and reliability of this Category One Wireless system it is vitally important that you
read this user manual in
full
before attempting to use the system. Failure to understand the correct
installation method and functions of the system may lead to intermittent and unreliable
connectivity.
We would be delighted to assist all Evacuator Alarm clients with free Telephone Support during
office normal hours. For assistance please contact our Technical Support Team on 0845 130 7258 or
alternatively email us on
technical@evacuatoralarms.com
.
Specification Overview (All models)
Cable and wire free operation. 40 Call Points per Zone. Unlimited number of Sounder strobe units
(subject to system design criteria) 16 Secure Zones. No laptops or Tablets required. Licence free
Radio Operation. Low battery indication. Secure Swipe Test and Reset Fob. Category 1 Receiver
Test Button
Display Screen
Device Number Box
Reset Button
Display Button
Status LED
On/Off Key Switch
Buzzer
Alarm LED
Battery Low LED
Main Activation
Antenna
