EVCO S.p.A.
Vcolor 869/879
| Installer manual ver. 2.2 | Code 144VC869E214
page 44 of 94
8.5
Cabinet sterilisation
Pressing this area enables selection of a sterilisation cycle.
The cabinet door must be closed to start up a sterilisation cycle.
Pressing the
key starts up the sterilisation cycle.
Sterilisation ends when the time set by parameter u6 has elapsed, after the
key has been pressed or if the door
is opened. During sterilisation the cabinet sterilisation relay is active. If parameter u11 is set to 1, the evaporator fans
are also active. If the fans are run at variable speeds, there will be 100% ventilation during sterilisation.
The display will show the count-down for the remaining time. At the end of the cycle the buzzer sounds and the screen
returns to the Home screen.