EVE
Audio product manual
Remote Control
13
OPERATION
signal, the longer the brightly lit-up ring.
•
Bright Point
Only the LEDs corresponding to the selected volume level light up brightly.
The louder the signal, the further up the brightly lit-up point moves.
•
Dimly Lit Ring
All LEDs up to the selected volume level light up dimly. The louder the
signal, the longer the dimly lit-up ring. In this mode, the LEDs light up
brightly momentarily while you adjust the volume level.
•
Dimly Lit Point
Only the LEDs corresponding to the selected volume level light up dimly.
The louder the signal, the further up the dimly lit-up point moves.
!
Intermediate steps are indicated by the lighting of two adjacent LEDs. The
level ranges from -60 dB to +10 dB, taking “0 dB” as reference point.
3.11.
Saving Your Settings
All settings on the front and rear panels are automatically saved. The
loudspeakers can be disconnected anytime without the settings being
lost.
3.12.
Remote Control
Your EVE Audio subwoofer comes with an IR remote control that allows
you to control almost all functions available on the front panel.
In order to start using the remote control, you must first insert the supplied
batteries in the battery compartment. Please pay attention to the polarity.
Hold the remote control in such a way that the infrared cell points towards
the receiver cell on the subwoofer. There should be no objects between
both cells in order to achieve the best performance.
•
On Button
Use the On button to put the subwoofer in Standby mode (see Powering
