PILOT’S OPERATING HANDBOOK
Section 7
Airplane and System
Description
2015-07-20
7-21
Doc. No. POH-20101308
Standard Mode
Select Standard mode by pressing the MDE key.
The last displayed and preset frequencies appear on the display.
Frequency Setting
New frequencies are set first as preset frequencies. After that it is possible to
switch this preset frequency to the active frequency.
Setting is performed by dual knob on the right side of the transceiver panel:
•
By turning the big knob (outer) you will change frequency
with 1 MHz steps.
•
By turning the small knob (inner) you will change frequency
with 25 kHz steps.
Storage operation
Press the STO key.
The active frequency remains displayed in the top line.
The preset frequency appears flashing in the bottom line. The required frequency
can be set using inner frequency knob (seps of 1) or outer frequency knob (steps
of 10).
Press the STO key again.
The next free channel is shown flasing “CH” and he letter F (free channel)
appears in the bottom line. If no memory channel is free, than the highest assign
memory channel is selected automatically.
Or
Select the channel to be overwritten using the rotary knobs.
Press the STO key again.
The selected frequency is stored in the free channel and the storage process is
ended.
Summary of Contents for SportStar MAX
Page 2: ......
