44
45
1.Secure SecureMax base to the vehicle seat.
Base is securely installed with lower
anchor connector assembly (p. 46-53).
OR
Base is securely installed with vehicle seat
belt (p. 58-61).
IMPORTANT: A properly secured base does
NOT
move more than 2.5 cm (1 in.) from
side-to-side or from front-to-back at the lower
anchor connector assembly/vehicle belt path.
Base is adjusted so that level indicator is in
correct color zone for your child
(p. 69 and 70).
If necessary, a towel/small blanket is rolled up
and placed beneath the front edge of the base
for additional leveling (p. 70).
Installation Checklist with Base
2.Secure child to the carrier.
Refer to p. 87-91.
Harness straps are at, or below, shoulder level
(p. 75).
Both buckle tongues are fastened (p. 89).
Chest clip is connected and positioned at armpit
level (p. 90).
Harness straps are snug against the child and
you should not be able to pinch the harness
(p. 91).
Crotch strap is snug against the child but
NOT
under the child’s bottom (p. 76).
Waist straps are snug against the child but
NOT
under the child’s legs (p. 80).
3.Check your work.
The base does
NOT
move more than 2.5 cm
(1 in.) from side-to-side or from front-to-back
at the lower anchor connector assembly/
vehicle belt path.
The base is level when level indicator is in the
correct color zone for your child (p. 69 and 70).
Installation Checklist with Base (cont.)
