21
Installing the Convenience Base
with Lower Anchor Connectors
Before you begin, be sure the vehicle is on a
level surface.
2
1
WARNING!
DEATH or SERIOUS
INJURY can occur.
Place the base on the
vehicle seat. Route the
lower anchor connector
strap and hook through
the lower anchor
connector strap openings.
Refer to your owner’s
manual to locate the
lower anchor bars on your vehicle seat.
Attach the right hook to the right
anchor bar and the left hook to
the left anchor bar.
DOUBLE
CHECK
that the hooks are fully
engaged by pulling hard on the
lower anchor connector strap.
Using your full weight, push the base firmly into the
vehicle seat, while pulling up on the strap to tighten.
The lower anchor connector assembly strap
must be as tight as possible.
DO NOT
use this child restraint if it moves more than 2.5
cm (1 in.) side-to-side or front to back at the belt path.
Move the child restraint to another seating location, try
to tighten the lower anchor assembly again, or install
with vehicle belts as shown on the following pages.
