For
ward-facing
45
44
4
5
3
2
1
this side
UP
thisside
UP
4
5
3
2
1
this side
UP
thisside
UP
FORWARD-FACING
REAR-FACING
Re-check the level
indicator. Ball should be
between the blue zone
for forward-facing.
To remove the lower
anchor connector
assembly strap, pull red
release strap. Remove the
other strap on the other
side of the seat from the
vehicle anchor.
8.
7.
FORWARD-F
ACING
REAR-FACING
1
2
3
4
5
PLACE
AT
ARM
PIT
4
5
3
2
1
FORW
ARD-F
ACING
REAR-F
ACIN
G
IMPORTANT:
•
Before installing this child restraint
forward-facing with
the vehicle seat belt
, you
MUST
move the Lower Anchor
Connector (UAS) Assembly to the
rear-facing belt path
so that it does not interfere with the vehicle seat belt.
Refer to page
27
for instructions on moving the Lower
Anchor Connector Assembly (UAS) to the forward-facing
belt path.
•
Check your vehicle owner’s manual to determine how to
lock your seat belt for child restraint installation. The seat
belt must be locked to properly secure the child restraint.
•
ALWAYS USE TETHER STRAP, if a Tether Anchor
is available. If not available, ALWAYS store the
Tether Strap
(p.
63
)
.
Re-route the lower anchor
connector strap through the
rear-facing belt path (p.
27
).
Store the lower anchor connector
(UAS) in the rear-facing belt path
as shown.
1.
2.
4
5
3
2
1
Lift up on the recline lever
as shown and adjust the
seat recline to
FORWARD-
FACING
Recline Positions
#4 or #5 ONLY.
Forward-facing
lower anchor (UAS)
storage compartment
1
2
3
4
5
PLACE
AT
ARMPIT
4
5
3
2
1
FORW
ARD-F
ACING
REAR-F
ACING
Forward-facing Installation
with Vehicle Seat Belt
Forward-facing Installation with Lower
Anchor (UAS) Connectors (cont.)