For
ward-facing
47
46
3.
Place child restraint in your
vehicle
forward-facing
, as
shown. Always make sure the
bottom of the child restraint
sits flat on the vehicle seat.
Unhook tether strap from the
rear of the child restraint and
place tether hook with
red
adjuster
(p.
63
)
over back
of vehicle seat.
Make sure that the seat
is positioned so that the
leveling ball is in the blue
zone for forward-facing use.
Tether
Strap
FORWARD-FACING
REAR-FACING
FORWARD-F
ACING
REAR-FACING
4. Ensure child restraint is secure.
-
To secure a child restraint with Lap Belt,
go to Step 4a.
- To secure a child restraint that has Lap/Shoulder Belt
go to Step 4b.
1
2
3
4
5
PLACE
AT
ARM
PIT
1
2
3
4
5
PL
ACE
AT
ARM
PIT
1
2
3
4
5
PLA
C
E
AT
ARMPIT
4a.
The vehicle seat belt must be as tight as possible.
Using your full weight, push the child restraint firmly
into the vehicle seat as you tighten the vehicle
seat
belt
, as shown. Lower the back pad.
Raise headrest to its highest
position (p.
58
), then lift
back pad away from child
restraint for easier access.
Route the lap belt through
the forward-facing belt path
and continue through the
opposite opening of the
child restraint. Fasten the
buckle.
IMPORTANT:
Make sure
the lap belt lies flat without
twisting.
Lap belt
Back pad
4
5
3
2
1
Forward-facing Installation with
Vehicle Seat Belt - Lap Belt
CLICK!
1
2
3
4
5
Forward-facing Installation
with Vehicle Seat Belt (cont.)
