73
72
General
Note:
To re-attach Seat Pad, reverse this process.
PLACE
AT ARMPIT
Remove seat pad from
headrest, as shown.
12.
Removing the Seat Pad (cont.)
13.
Unclip tether from the
tether anchor bar and push
through slot in seat pad as
shown.
Care and Cleaning
•
DO NOT
lubricate or immerse in water the LATCH
connectors, the buckle, or any other part of this child
restraint, unless rinsing is permitted, as stated on the
back of the buckle for your restraint.
• Plastic and metal parts may be wiped clean with mild
soap and water and dried with a soft cloth. Do not use
abrasive cleaners or solvents.
• Take care not to damage any labels.
• The harness can be wiped clean with mild soap and
water. Allow harness to air dry.
• Machine wash the seat pad separately in cold water,
delicate cycle. Tumble dry 10 to 15 minutes on low
heat.
•
NEVER
use child restraint without the seat pad.
• To protect the child restraint from damage caused
by weather, rodents, and other elements common to
garages, the outdoors, and other storage locations,
remove the seat pad and thoroughly clean the
restraint and pad prior to storage. Take care to clean
in the areas where crumbs and other debris tend to
accumulate.
To help protect the
vehicle upholstery, place a
towel beneath and behind
the child restraint.
T
ip
!
T
ip
!
