4
5
Assembling the ExerSaucer
Adjusting the Height
8.
Press assembled seat
L
down firmly onto the top of the
tray
M
until it snaps into place and spins freely.
10.
Insert a strap
O
through a strap slot
P
in the tray
N
. Pull the strap completely through the tray making sure
the strap anchor
Q
lies flat against the bottom of the tray, as shown. Repeat for the other two straps.
Attaching the Toys
WARNING
4OPREVENTINJURYMAKESUREALLTHREESTRAPANCHORSARECOMPLETELY
inserted and resting against the bottom of the tray.
L
M
N
9.
Lean the tray assembly
N
against one of the pylons,
as shown.
O
O
P
N
Q
+
+
+
–
–
–
3 “AAA” Batteries
+
+
+
–
–
–
3 “AAA” Batteries
ALWAYS
remove baby from ExerSaucer before adjusting. Unlock the adjustment knob
A
by turning to the right, then moving
until the desired height is obtained (there are three positions). Turn the adjustment knob to the left to lock in place. Repeat the
adjustment on the other two pylons.
Note:
Make sure that
all three
legs are adjusted to the same position.
IMPORTANT:
Always make sure the adjustment knobs are locked in position before placing the child in the activity center.
$URINGUSEALLOWTHEBABYSTOESONLYTOTOUCHTHEBASE
DO NOT
allow the baby to stand flat-footed on the base. As baby grows
ANDBECOMESMOREACTIVERAISETHETRAYTOTHENEXTLEVELSOTHATBABYENJOYSTHEMOSTCOMFORTABLEFITANDMAXIMUMUSEOFTHESPIN
and bounce features. Discontinue use when baby can stand flat-footed at the highest setting.
WARNING
2
1
3
2
1
3
2
1
3
A
A
A
UNLOCK
ADJUST
LOCK
