Even-
GLO™ Series GA301
Page 43
Oct. 4, 2018
Maintenance & Troubleshooting Instructions
c.
Remove the Gas Hose Assembly from the Pole to inspect and Leak Test
the entire hose and all connections
. Repair / replace as required.
2.
Check condition of the Burner, especially the integrity of the flame screen.
3.
Inspect condition of spark and sense electrode. Check for cracks in ceramic
insulators or excessive corrosion.
4.
Inspect condition of high tension lead to spark rod
Troubleshooting instructions for models GA301-M & GA301-MP:
1.
No gas supply at burner:
Ensure manual shut off valve is in proper position
Ensure there is pressure and flow at inlet to gas valve.
2.
No spark:
Ensure battery in ignition module is operating.
Ensure spark electrode assembly is grounded and there are no cracks in
ceramic insulator.
Ensure the gap (spark gap) between Pilot and Spark Ignitor
electrode is 1/8”
–
3/16” (3mm –
4.5mm) as per picture below.
