background image

73

 P

RODUCT

 W

ARRANTY

 I

NFORMATION

7. WHAT BRP WILL DO

BRP's obligations under this warranty are limited to, at its sole discretion, repairing or replacing parts of
Product found to be defective in material or workmanship, in the reasonable judgment of BRP. Such repair
or replacement of parts will be done without charge for parts and labor, at any authorized Dealer. BRP's
responsibility is limited to making the required repairs or replacements of parts with new or BRP-certified
re-manufactured parts. No claim of breach of warranty shall be cause for cancellation or rescission of the
sale of Product to owner. 

In the event that warranty service is required outside of the fifty United States or Canada, owner will bear
responsibility for any additional charges due to local practices and conditions, such as, but not limited to,
freight, insurance, taxes, license fees, import duties, and any and all other financial charges, including
those levied by governments, states, territories and their respective agencies. 

BRP reserves the right to improve, modify or change Products from time to time without assuming any
obligation to modify Products previously manufactured.

8. TRANSFER

If the ownership of Product is transferred during the warranty coverage period, this warranty shall also be
transferred and be valid for the remaining coverage period provided that BRP is notified of such transfer
of ownership in the following way:

1. The former owner contacts BRP (at the phone number provided below) or a Dealer and gives the co-

ordinates of the new owner; or

2. BRP or a Dealer receives a proof that the former owner agreed to the transfer of ownership, in addi-

tion to the coordinates of the new owner.

9. CONSUMER ASSISTANCE

• In the event of a controversy or dispute in connection with this BRP limited warranty, BRP recommends

that you first try to resolve the issue at the dealership level by discussing the issue with Dealer's service
manager or owner; 

• If further assistance is required, please contact 

BRP US Inc. / Marine Propulsion Systems, 
After Sales Support, 
P.O Box 597, 
Sturtevant, WI 53177, 
1-262-884-5993 

BRP US INC. LIMITED WARRANTY FOR EVINRUDE OUTBOARD ENGINES 
SOLD OUTSIDE THE UNITED STATES AND CANADA

"For a copy of the Limited Warranty, see your Bombardier Recreational Products ("BRP") distributor/deal-
er authorized to distribute Evinrude products in the country in which the sale occurs. If further assistance
is required, please contact BRP US Inc., Attn: After Sales Support, P.O. Box 597, Sturtevant, WI 53177,
or the affiliate of BRP where the Product was registered for warranty.

* Engines sold in Canada are distributed and serviced by Bombardier Recreational Products Inc.
Limited Warranty Revision US/CA July 2014

https://www.boat-manuals.com/evinrude/

Summary of Contents for E-TEC 115 H.P.

































































































Reviews: