7
。
FULL LED: Flashing.
。
Recondition charging
。
Charger will go into this stage if battery fails Test Mode due to its
condition, age or being under charged.
。
This stage can recover batteries from deeply discharged state
increasing performance and battery life.
。
FULL LED: Flashing.
。
Float mode
。
Full LED: ON.
。
The float mode allows the charger to effectively be left connected
to your batteries; it works at a safe level and ready for use.
。
Maintenance mode
。
Full LED: ON.
。
The program engages a special charging waveform and monitors
the battery voltage variety, if the battery voltage sinks, the special
pulses will keep the battery in optimal state, if the battery voltage
drops even lower, the battery charger will switch into bulk charging .
The maintenance mode allows the charger to be connected to the
battery over the course of a season; If possible, check the
electrolyte liquid level in the battery.
LEDstatusindicationtable:
CURRENT & VOLTAGE CURVES
