Installation guidelines for the POWERLINE GREEN 33 LITE UPS units in parallel/redundant operation
3
www.ever.eu
Technical support
, tel.: +48 61 6500 400
2016-10-27 11:56
SAFETY REMARKS
Read and understand the safety remarks and guidelines in the (full) Instruction
Manual of this UPS before attempting any switching operations.
REQUIREMENTS FOR PREPARATION OF THE POWER
SUPPLY AND RECEIVER SYSTEM
A)
Shipping requirements.
CAUTION!
Extreme caution is required during shipping, unloading and
installation of the devices.
Transport the UPS units in the upright position as indicated on the packaging.
Protect the devices against weather (i.e. protect from rain).
Prolonged shipping or storage below 0
C and/or above 25
C is NOT
recommended due to the battery life and the condensation hazard.
The devices are heavy and large. This require proper transport and handling
facilities (an adequate number of helpers, a forklift truck and properly
dimensioned handling routes).
CAUTION!
Contact the Technical Service if any damage is found that
may affect proper performance of the devices.
B)
Location
CAUTION!
Selection of the installation site and assurance of proper
operating conditions for the devices are the user's responsibility.
Install the UPS units in a separate room (to isolate the constant noise during
operation and protect the devices from unauthorised access).
Do not expose the devices to extreme (high and/or low) temperatures. Extreme
temperatures may shorten the battery life (the optimum temperature range is +18
to +25
ºC).
Do not install the devices in rooms with dusty, corrosive and/or flammable
atmosphere or where the atmospheric humidity is high (the recommended
humidity is 90% without condensation).
If the devices are installed on false/technical access floors, consider the structural
strength of the installation location.
Summary of Contents for POWERLINE GREEN 33 LITE
Page 1: ......
