Ever SINLINE XL 1800 Instruction Manual Download | Manualshive

Page: 11 / 32

background image

SINLINE XL series UPS – Instruction Manual

2010/01/27

www.ever.eu

11

Check the contents of the packaging. The packaging should contain:

•

the UPS.

•

a CD-ROM with the PowerSoft software and complete instruction manual,

•

quick reference guide,

•

1 communication cable to connect the back-up to a computer via RS232,

•

1 communication cable to connect the back-up to a computer via USB,

•

2 outlet power cords,

•

warranty card,

•

2 moving handles for cabinet installation (Rack Model only).

INSTALLATION OF THE UPS - Tower Model

When choosing the installation location you must take the device's weight into

account. The back-up should only be used in rooms whose dustiness, temperature

and moisture levels conform with the device's specification. To ensure correct

operation of the back-up, appropriate cooling conditions for the device must be

provided. For this reason the ventilation openings on the back-up's case must be

uncovered and the distance between the back-up and other objects should be at

least 10 cm.

INSTALLATION OF THE UPS - Rack Model

When choosing the installation location you must take the device's weight into

account. The strength of the supporting cabinet/rack is essential. The back-up should

only be used in rooms whose dustiness, temperature and moisture levels conform

with the device's specification. To ensure correct operation of the back-up,

appropriate cooling conditions for the device must be provided. For this reason the

ventilation openings on the back-up's case must be uncovered and the distance

between the back-up and other objects should be at least 10 cm.

The back-up is designed for installation in a cabinet/rack. In order to facilitate

installation in cabinets/racks of various depth the device is equipped with moving

handles which enable installation in racks with depth of up to 700 mm. If the back-up

is to be installed in a rack of 900 mm or 1000 mm depth it is possible to order longer

handles to adjust the product for installation in such a rack. To install the UPS take

the following steps:

«
...
9
10
11
12
13
...
»

Summary of Contents for SINLINE XL 1800

































Reviews:

No comments

Related manuals for SINLINE XL 1800

Brand: Riello Pages: 59

Brand: Ablerex Pages: 14

Brand: Atlantis Land Pages: 2

Brand: FE Pages: 68

Minuteman PRO-RT 2U Series

Brand: Para systems Pages: 18

Brand: bXterra Pages: 16

Brand: X-TREME Pages: 40

Brand: CABAC Pages: 20

Brand: Ablerex Pages: 29

JOVYTEC PMS 2002K

Brand: WÄRTSILÄ Pages: 33

Brand: Forza Pages: 36

Brand: Tripp Lite Pages: 36

Brand: Eaton Pages: 50

Power Xpert 9395P 250 kVA

Brand: Eaton Pages: 170

Power Xpert 9395C

Brand: Eaton Pages: 175

Brand: CyberPower Pages: 2

OfficePower 1250AVR

Brand: CyberPower Pages: 2

Brand: ICS Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands