With two persons on the diagonal ends, lift and partially pull
the canopy frame apart.
Unfold the canopy and place on top of the canopy frame.
Attach the four canopy corners to the awning poles,
Under the canopy, place one hand on the upper frame and
use the other hand to push the central hub straight up until
it clicks into the central pole.
Finish attaching the canopy top inside the canopy frame
using the Velcro loops.
Press the red button on each leg and raise or lower to adjust
the canopy height.
Measure out each leg to a proper distance and secure four stakes to
the ground. Attach the ropes to the canopy top and tie the attached ropes
to the stakes in the ground. Ensure the ropes have the proper tension
by adjusting the plastic adjusters on the ropes.
Please Contact 1-800-305-1726 for further assistance.
12 ft. x12 ft.
MegaShade Pop Up Canopy
Model: NS PUG 144-150D
4x
4x
4x
4x
4x
4x
Wooden deck
A Pistol drill is needed here.
A Pistol drill is needed here.
Concrete ground
4x
4x
Measure out each leg to a proper distance, drill four holes (ø10mm)
in the concrete ground with a pistol drill, then knock the expansion
sleeves (BB) into the holes, and secure four self tapping screws (AA)
to the concrete ground.
Measure out each leg to a proper distance and
secure four self tapping screws (AA) to the
wooden deck.
4x
4x
AA /4pcs
BB /4pcs
DD /4pcs
CC /8pcs
EE /1pcs
