Installing Side Brackets
6
S T E P S I X :
• Place Side Bracket (10) on top of Leg
• Attach Side Bracket to Leg using two M6x20mm Countersunk Screws (16)
• Repeat on other side
assembly
Secure Frame, Rod and Control Box
S T E P E I G H T :
8
Attaching Frame To Table Top
7
a
S T E P S E V E N ( a ) :
• Turn over assembled frame
• Place frame on table top
• Adjust frame to align with pre-drilled holes on table top
• Insert and tighten two M6x12mm Pan Head Screws (19) to secure
frame to table top
• Repeat for the other side
For Pre-Drilled Table Tops
Attaching Frame To Table Top
7
b
S T E P S E V E N ( b ) :
For Non Pre-Drilled Table Tops
If your table is not pre-drilled:
• Lock the position of the Center Rails (5) using eight M6x10mm
Pan Head Screws (15)
• Double-check the Frame is properly positioned on the underside
of the Table Top
• Attach Frame to underside of Table Top using seven ST5x20mm Wood
Screws (17) provided
• Tighten pre-installed set screws on Aluminum Transfer Bar (8)
• Fasten Frame and Rails with the eight pre-installed M8x10 Set Screws
• Slot Control Box (11) into frame and push to install
5
8
10
11
16
19
4
6
