Everdure RBES63, Installation, Operation & Maintenance Instructions Manual

     DESIGNED TO PERFECTION 

CLEANING  

SAFETY PRECAUTION 

Before cleaning your range hood or performing any maintenance, please ensure that the range hood is 
turned off at the power point. 
 
Do not use abrasive cleaners to clean the range hood. The use of warm soapy water and a cloth are 

recommended. 
Ensure that the range hood is cleaned regularly, as a build up of grease and fat may occur otherwise. 
The filters on the range hood must be cleaned regularly to maintain efficiency, and prevent grease build up. 
The filter mesh is made of a high density Stainless Steel. It is recommended that this is undertaken every 4 – 6 

weeks, depending on frequency of use. The filters can be cleaned with warm soapy water or a cloth. 
Cleaning of the range hood must be performed as described above, otherwise there is a possibility of a fire 
hazard due to grease and fat build up. 
 
 

REPLACING THE BULBS  

MODELS RBES63 & RBES91 

1. Switch the unit off and disconnect from mains power first.  

2. Remove the light chrome rims by turning in anti-clockwise direction.  

3. Pull out the halogen light bulb carefully and replace by same type and same rated halogen light 

bulb (12V G4 base 20W MAX).  

4. Assembly the chrome rims back to the unit.  

 
 
 
MODEL RBES64 & RBES92 

1.

Switch the unit off and disconnect from mains power first. 

2.

Remove the light chrome rims with glass by prizing carefully with a screwdriver. 

3.

Pull out the halogen light bulb carefully and replace with the same type and rated halogen light 
bulb (12V G4 base 20W MAX). 

4.

Replace the chrome rims back to the unit with glass. 
 

9