Document No. 1112M001 Revision 1.8 Date: June 2013
19
4.6 Blades and Nosecone Stiffener Ring
You need the fastener pack marked “Blade Fasteners” for this work.
Fit the Nosecone stiffener ring (29) over the pitch control
before fitting the blades (25) and leave it loose in place !! The ring is
tapered and the smaller diameter must face forward to match the
shape of the nosecone. The ring is later bolted inside the nosecone.
Each blade is fitted with 2 steel positioning sleeves. The protruding
end of each sleeve must locate in the recessed hole on the blade
mount.
►
Insert the two bolts (28) from the rear, through the blade mount and
push them through to the front.
►
Offer the first blade (25) to the blade mount and slide the blade
over the two fixing bolts. The blade serial number must face
forward and be visible from the front.
►
Fit the compression plate (27) on to the blade and protruding bolts.
PARTS LIST
ITEM
QTY
DESCRIPTION
25
3
Blade
26
6
Hex Nut M16 Nylock
27
3
Compression plate
28
6
Hex Bolt M16 x 100
29
1
Nose Cone stiffener ring
