Document No. 1112M001 Revision 1.6 Date: November 2012 50
►
Fit top slip ring 2 halves (44) to
generator swivel shaft and secure with
2 M8x50 SS Allen Cap screws. (46)
►
Fit top yoke bracket (10) onto
generator drum and secure with M8x16
cap screws SS (20). Secure with
thread glue.
Ensure that the threaded hole is
clean.
Before inserting the bottom yoke,
please insert 4-off M16 x 100 bolts
(G) through the bottom flange at the
back of the yaw shaft. After fitment
of the yokes, access to these holes
will no longer be available.
Observe that the two yokes (14 & 11)
are different. The bottom yoke (14) has a protrusion in the
“cradle” of the yoke as well as a cut-way on both arms on the
cradle. (See page 13)
►
Fit bottom yoke bracket (15) onto generator flange, secure with x2
cap screw M8x16 SS (20) with Thread glue.
44
15
10
G
