EverExceed Smart IT Cabin
Solution User Manual
to the wall or other obstacles is larger than 1.0m
Ambient
Temperature
0-40
℃
Ambient
Humidity
30%RH-95%RH(when the whole unit is operating in high temperature
and high humidity environment, condensing water may appear on the
external surface of front glass door and the display panel
Storage
Environment
Indoor, clean without dust
Ambient
Temperature
-30
℃
-70
℃
Altitude
1000m
，
Above 1000m with derate power use
Table 1-3 Operating condition
Chapter 2 Preliminary Before Installation
This chapter expands the preparation before installing the Smartcabin,
including installation tools, fittings, accessories, conveying, unpacking,
inspection, installation safety instructions and computer room requirement.
Note:
1. The components of Smart IT Cabin are large and heavy. Therefore, the risk of
collapse exists, improper operation may cause physical injury or death, and damage
to the equipment.
2. The center of gravity of Smart IT Cabin is forward-inclined, during conveying process,
not to adjust the bearing position of the forklift or the hand pallet truck.
3. Read all the following operation guides before attempting to move, put up the
components or unpack the package.
4. The sharp edge, object sharp angle and bare buckle can result in physical injury. Only
trained personnel who wear proper safety helmet, gloves, shoes and glasses can
move and put up the components, remove the package or prepare to install.
5. The cabinet may be too high to go through the door together with the pallet. To avoid
damage to the equipment and the building, measure the height of the cabinet and the
door, and confirm the clearance before moving it.
2.1 Conveying, Unpacking and Inspection
Transportation
It is recommended to choose railway or ship for transporting the cabinet, AC
indoor unit and AC outdoor unit. If truck transportation is chosen, choose
4
/
32
www.everexceed.com
