3
ASSEMBLY
INSTRUCTIONS
Step 1
Assembly the rear and front stabilizer
(27&24) with 4 bolts (21), 4 nuts (26) and 4
washers (7).
Step 2
Connect the computer cable up (6) and down
(17), connect the tension control cable up (15)
and down (16) as shown in the right sketch.
Assemble the handlebar post (10) to the main
frame, fix it with four screws (19) and washers
(7).
a
b
c
d
e
Step 3
Assemble the seat (11) to the seat post (14)
with 3 nuts (13) and washers (12).
Insert the seat post into the main frame
through the plastic sleeve. Select the ideal
hole position on the seat post (14). Insert the
knob (18) into the hole. Tighten fully the
knob.
