4.
To pause countdown, press ‘
CD
’, and the
logo stops flashing until you press
CD
again to continue countdown.
NOTE
:
1.
Countdown: from 1minute minimum and 99hrs and 59minutes maximum.
2.
When in ‘
CD
’ mode, other settings will be disabled.
。
3.
When Countdown is finished,
logo will disappear on the LCD screen, Power status
shows OFF. You can Press
button (or any 4 small buttons at the corner) to finish
the countdown manually and back to clock mode.
5) ON/OFF mode and function mode change
Press
button to change the manual ON/OFF mode and clock mode. Product is
default set by clock mode.
Press
button once, timer changes to manual ON/OFF mode, ON or OFF will be
appeared on the LCD according to the current status, no clock shows. Press
button
(or any 4 small buttons at the corner) to switch ON/OFF manually ONLY. Press
again, it will return to clock mode. If you want to change to Timer mode, press “
PROG
“. If
you want Random mode, press “
RND
” to activate.
Clock mode
Timer mode
Random mode
Countdown mode
Above pictures shows the different function modes
Above pictures
：
LCD display in manual ON/OFF mode.
6) Daylight Saving Time (DST) setting
