Value IP 288 / 368 / 468 Series
11
4.4.
Basic Installation
4.4.1.
Mounting and Wiring
EBN288/368/468
1.
Before screwing the camera to the wall, stick the
Sticker
on the wall / ceiling to mark the position
for installation. Drill four holes on the wall / ceiling according to the supplied
Sticker
and push the
supplied four
Screw Anchors
into the four holes on the wall / ceiling. Drill another hole in the
middle of the
Sticker
if you wish to run the wires into the wall / ceiling.
2.
Twist the Outer Housing counterclockwise and then remove the Outer Housing from the camera
base.
3.
Place the camera base on the wall / ceiling and run the cable through the camera base first.
4.
Tread the cables:
a.
From the side cut of the camera base
