Value IP 288 / 368 / 468 Series
40
7.1.2.
Date / Time
You can set up the system’s time and NTP server. Click the tab of the one you want to see.
Note:
Before start operating the IP camera, please make sure the camera date and time are
correct.
7.1.2.1.
Date/Time Settings
Device Time:
Display the device current time. You can manually set up and click
Apply
to save the
time setting. Click
PC
to automatically adjust the camera’s time by synchronizing with the PC.
After complete the settings, click
Save
to apply the changes.
7.1.2.2.
NTP Settings
Enable:
Check the box to enable NTP function.
NTP Server Address:
Enter the Network Time Protocol server, if applicable. The camera’s time will
be automatically adjusted by synchronizing with the NTP server.
