Value IP 288 / 368 / 468 Series
60
7.3.
Event Settings
You can set up the Motion Detection event or Tampering Detection event to automatically notify the
users when an event occurs.
7.3.1.
Event
7.3.1.1.
Motion Settings
Use this page to configure the area in which motion will be detected, and set up schedules to
active alarm functions. When a motion is detected by the camera, the alarm icon
at the top
of the Live View window will turn red and blink
to alert the user. Up to four Motion areas
can be configured.
To set up a Motion Detection area:
1.
Check the
Enable
box to enable the Motion Detection function. Select a value from the
drop-down list to set the sensitivity of the Motion Detection.
2.
Select a day (Monday ~ Sunday) from the
Week
drop-down list to configure the schedule.
