Value IP 288 / 368 / 468 Series
67
7.3.2.
Notification
7.3.2.1.
Email Settings
Sender Address:
Input the sender’s e-mail address, so that the receiver can recognize the sender
when an event message is received.
Password:
Input the user’s login password if the SMTP server requires authentication.
Confirm PWD:
Type the password again to confirm it.
SMTP Server:
Enter the IP address or the host name of the SMTP server used to send e-mails.
SMTP Port:
Enter the port number for SMTP.
Email Sending Interval:
Input the interval time for sending e-mail notification.
Email Title:
Type the e-mail title.
Receiver Address:
Input the e-mail addresses for receiving an e-mail message when events occur.
Currently only one receiver address can be configured.
After complete the settings, click
Save
to apply the settings.
