EAN7360 / EHN7360 / EZN7360
14
To mount the camera to the wall and connect the cables to the related devices:
1.
Unscrew the four screws and remove the cover from the camera.
2.
Screw the Base Plate to the Wiring Box using the supplied four
Phillips Screw.
Base Plate
Wiring Box
If you want to
wire the cables through the
bottom of the Camera Case
, follow the steps below:
a.
Remove the Circle Plate on the bottom of the Camera Case. You can simply loosen the Circle
Plate using a coin.
Circle Plate
Camera Case
