EAN7360 / EHN7360 / EZN7360
20
You can wire the cables from the side of the camera or through the wall.
4.
Connect the network, power and other cables of the camera to the related devices.
If you want to use the
Cable Gland
to connect the network cable for waterproofing:
a.
Insert the supplied
Stopper
to the
Cable Gland
.
b.
Insert a RJ-45 network cable (without the RJ-45 connector on the one end) through the
Screw Cap
and
Cable Gland
.
c.
Crimp the RJ-45 connector onto the network cable. Note that the wires should be placed
into the RJ-45 connector based on the following order (from left to right).
d.
Connect the RJ-45 network cable to the LAN / PoE Cable. Tightly screw the
Cable Gland
and
Screw Cap
.
Wire the cables from the side
of the camera
Wire the cables through the wall
Cable Gland
Stopper
Cable Gland
Screw Cap
Orange with white stripe
Orange
Green with white stripe
Blue
Blue with white stripe
Green
Brown with white stripe
Brown
