3
a.
If you want to wire the cables from the Side Cut on the Camera Base:
Attach the Camera Body to the Camera Base and run the cables through
the Camera Base, and then place the cable under the Side Cut. Finally,
screw the Camera Base to the surface with the supplied 4 Screws.
Side Cut
Wall
Camera Base
Camera Body
b.
If you want to wire the cables through the surface:
Attach and screw the Camera Base to the surface with the supplied 4
Screws, and then attach the Camera Body to the Camera Base.
Wall
Camera Base
Camera Body
4.
Screw back the Outer Housing and adjust camera angle simultaneously.
360
°
180
°
180
°
All manuals and user guides at all-guides.com
