EZN268
53
【
SMTP (Email) Settings
】
This area is for configuring the mail server that is used to send e-mail text
notifications and one image file from the camera to predefined addresses via SMTP. Note that to
enable e-mail notification function, you have to check the
Send Mail Notification
box in the Event
Management field (see
6.3.2 Event)
.
SMTP Server
: Enter the IP address or the host name of the SMTP server used to send e-mails.
SMTP Port
: Enter the port number for SMTP. The default is 25.
Authentication
: Check the box if the SMTP server requires authentication (user/password).
Username
: Input the user’s login ID if the SMTP server requires authentication.
Password
: Input the user’s login password if the SMTP server requires authentication.
Receiver Address
: Input the e-mail addresses for receiving an e-mail message when events
occur. Please use “
;
” to separate multiple addresses.
Sender Address
: Input the sender’s e-mail address, so that the receiver can recognize the
sender when an event message is received.
•
Attach Image
: Check the box if you want to attach an image when events occur.
•
SSL Connection:
Check the box to enable the SSL function. Enable this function means you
can access the camera through the SSL protocol that provides communication security over
the Internet.
Send Test Email
: Click the
Test
button to send a testing email to the assigned address.
Click
Apply
to apply the changes or
Cancel
to cancel the changes and return to the previous
settings.
【
FTP Repository Settings
】
This area is for configuring the FTP server that is used to send alarm
recordings from the camera to the preconfigured FTP server. Note that to enable uploading
recordings to the FTP server function, you have to check the
Upload to FTP
box in the Event
Management field (see
6.3.2 Event)
.
FTP Server
: Enter the IP address or the host name of the FTP server.
FTP Port:
Enter the port number for the FTP server. Default is 21.
Recording Path
: Assign the recording path.
Username
: Set FTP User’s name.
Password
: Set FTP password.
PASV mode
: Check the box to enable Passive mode. Passive mode is normally enabled. If a
connection cannot be established, uncheck "PASV Mode”.
