Value IP 288 / 368 / 468 Series
15
6.
To adjust camera angles.
Pan Adjustment: Simply turn left / right of the camera by 175° each side to the desired
position.
175°
175°
Tilt Adjustment: Adjust the tilt angle between 25° and 90°.
25~90°
7.
Secure the cover back to the camera.
EZN288/368/468 & EZN288M/368M/468M
1.
Before screwing the camera to the wall, stick the Sticker on the wall / ceiling to mark the
screw position. Drill three (EZN288/368/468) or four (EZN288M/368M/468M) holes on the
wall / ceiling according to the supplied Sticker and push the supplied Anchors into the holes
on the wall / ceiling. Drill another hole in the middle of the Sticker if you wish to run the
wires into the wall / ceiling.
EZN288/368/468
EZN288M/368M/468M
