Value IP 288 / 368 / 468 Series
18
Tilt Adjustment: Loosen the Set Screw using the provided Hexagon Wrench and adjust the
angle by 90°.
Set Screw
90°
Set Screw
90°
EZN288/368/468
EZN288M/368M/468M
Rotational Adjustment: Loosen the Screw using the provided Hexagon Wrench and rotate
the camera by 360°.
Set Screw
Set Screw
EZN288/368/468
EZN288M/368M/468M
Note:
1.
Before start operating the IP camera, please make sure the camera date and time are
correct. To configure the camera date/time, go to System > Date/Time setting page on
Web UI.
2.
By default, the system will automatically adjust the IR LED strength according to the
scene, so please avoid IR reflection when installing the camera to prevent out-of-focus at
night.
3.
Under Auto focus mode, if the camera does not focus after switching the Day/Night
mode, it is recommended to switch the focus mode to Manual and adjust focus manually.