Value IP 288 / 368 / 468 Series
23
4.
Click Login, the Live View window appears.
Note:
1.
To enable Remote Live View, Firmware Upgrade and ActiveX Prompt on Internet
Explorer, some settings have to be complete. Please refer to 5.2 Settings for Microsoft
Internet Explorer.
2.
The default IP mode of the IP camera is DHCP. However, if there is no dynamic IP
address assigned to the device, its IP will switch to 192.168.0.10.
5.
To optionally configure the Machine Name, IP Address, IP Type or Port Number using the
IPU:
a.
Log in the camera by checking the desired model and then click the Log in
icon.
The Log in dialog box appears.
b.
Type the Username and Password. Click the OK button, the Login status displays.
Note:
1.
The default user ID is user1 and the default password is 11111111.
2.
If you select more than one camera that has the same user ID / password, you will
be able to log in several cameras at once.
c.
Right click the column to configure the settings. Click the Apply Changes
button to
apply and save the settings.
