3
5.
Connect the BNC connector of the camera to a color monitor, or other video device
through a 75 ohm type coaxial cable with BNC female connector at cable extension.
6.
Connect the DC +12V regulated power source of the camera (DC Jack) to the DC 12V
Power-in jack with 2 mm, , outer- plug.
7. Once the image appears on the monitor, loosen the fixing screw located at the lens mount
then adjust the focus and diaphragm of the lens to obtain the best picture. When the ideal
picture is obtained, secure the lens mount by fixing screw firmly again.
8. Put the plastic cover back on the Dome Camera.
