ECOR FHD 4F / 8F / 16F Full HD DVR
39
8.
To delete a Preset Position (if supported by the camera):
a.
Click the
Preset
button.
b.
Click the desired Preset number.
c.
Click the
Delete
button.
9.
To operate the Auto Pan function, click the
Auto Pan
button.
10.
To operate the Pattern function, click the
Pattern
button. The Pattern is the “0” Tour in
Everfocus and Pelco PTZ cameras.
11.
To operate the Tour function:
a.
Click the
Tour
button.
b.
Click the desired Tour number.
c.
Click the
Go
button.
12.
To remove a pre-configured Tour (if supported by the camera):
a.
Click the
Tour
button.
b.
Click the desired Tour number.
c.
Click the
Delete
button.
Click
C
to clear the entered number in the Number Box.
Click
at the top-right corner to hide the PTZ Control Panel (see
4.1.1 Express Control of PTZ
).
To display the PTZ Control Panel, right-click on the screen.
Click
Logout
to close the PTZ Control Panel and exit the PTZ mode.
Note:
Before start using the Auto Pan, Pattern and Tour functions, you have to configure the
related settings for the connected PTZ cameras. Please refer to the User’s Manual of your PTZ
cameras.
