39
( % &
5
'
Figure 5.8 (Camera Menu – Video Loss)
6
Select the camera you wish to adjust, “Title” will change to the title name of the selected camera.
% 6
Check box to enable Video Loss.
'
6
Check box to record video loss events in the log.
6
This will transmit a signal to another device. It can be set to either “
” (not activated)
or “
2
” (output signal 1 transmits).
6
Output action when alarm is triggered.
Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will continuously work until user presses “
' (
” key.
Transparent: Alarm output continues as long as there is a video loss.
Trans+Timeout: Alarm output continues until event ends, then lasts for the set time duration.
6
Time duration selectable from 0 to 150 seconds.
< == 6
Check box to enable buzzer when a video loss event occurs.
6
Check box to enable email notification function when a video loss event occurs.
6
Press Copy key to copy the settings to other camera. This will bring up the copy window. Check the
boxes for each camera you wish to copy to, then click “OK” to copy settings. Click “Select All” to choose all
cameras. Click “Cancel” to cancel copy.
Downloaded from
www.Manualslib.com
manuals search engine
Summary of Contents for ECOR Series
Page 1: ...Instruction Manual Downloaded from www Manualslib com manuals search engine ...
Page 84: ...77 Downloaded from www Manualslib com manuals search engine ...
Page 85: ...78 Downloaded from www Manualslib com manuals search engine ...
Page 104: ...97 X i i i X i i i Downloaded from www Manualslib com manuals search engine ...
