III.
Lens Available
VI.
Installation Instructions
1.
Remove the plastic dome cover.
2.
Loosen the two screws of the supporting bracket to remove
the camera body.
3.
Using four screws to fix the camera base on the ceiling.
4.
Put the camera body back to the supporting bracket, the
connector of the back panel should always be the
* Standard board lens f=3.6 mm, F=2.0 mm.
* Other available lens : Lens f=2.5 mm, F=2.0 mm
Lens f=4.3 mm, F=2.0 mm
Lens f=6.0 mm, F=2.0 mm
Lens f=8.0 mm, F=2.0 mm
6
This Manual: http://www.manuallib.com/file/2673660